Emulex LightPulse LPe31002-M6-F Vært bus adapter PCI Express 2.0 x8 14.025Gbps
Emulex LightPulse LPe31002-M6-F - Vært bus adapter - PCIe 2.0 x8 lavprofil - 16Gb Fibre Channel x 2 - for PRIMERGY CX2560 M5, RX2520 M5, RX2530 M5, RX2530 M6, RX2540 M5, RX2540 M6, TX2550 M5
19 959,00DKK15 967,20DKK excl. VAT
-
Product no 992839775
Model S26361-F5596-L502
Brand Fujitsu
EAN 4057185676779
Weight 0.99 kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Produktbeskrivelse | Emulex LightPulse LPe31002-M6-F - vært bus adapter - PCIe 2.0 x8 - 16Gb Fibre Channel x 2 |
| Enhedstype | Vært bus adapter |
| Model | Indstikskort - lavprofil |
| Grænseflade (bus) type | PCI Express 2.0 x8 |
| PCI-specifikationsrevision | PCIe 1.0, PCIe 2.0 |
| Porte | 16Gb Fibre Channel x 2 |
| Kabeltype | Fiberoptik |
| Dataforbindelsesprotokol | 16 Gb Fiberkanal (SW) |
| Dataoverførselshastighed | 14.025 Gbps |
| Designet for | PRIMERGY CX2550 M2, CX2560 M4, CX2560 M5, CX2570 M2, CX2570 M4, RX1330 M4, RX2510 M2, RX2520 M4, RX2520 M5, RX2530 M2, RX2530 M4, RX2530 M5, RX2530 M6, RX2540 M2, RX2540 M4, RX2540 M5, RX2540 M6, RX4770 M3, RX4770 M4, TX1330 M4, TX2550 M4, TX2550 M5 |
| General | |
|---|---|
| Device Type | Host bus adapter |
| Form Factor | Plug-in card - low profile |
| Interface (Bus) Type | PCI Express 2.0 x8 |
| PCI Specification Revision | PCIe 1.0, PCIe 2.0 |
| Networking | |
| Cabling Type | Fiber optic |
| Connectivity Technology | Wired |
| Data Link Protocol | 16Gb Fibre Channel (Short Wave) |
| Data Transfer Rate | 14.025 Gbps |
| Features | Auto-negotiation |
| Fibre Channel | FC-AL, FC-AL-2, FC-DA, FC-FLA, FC-FS, FC-GS-2, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-Tape, FC-SP, FCP-4, FCP, FCP-2, FC-PI-2, FC-FS-2, FC-GS-5, FC-PI-4, FC-GS-6, FC-HBA, FC-PI-5, FC-LS-2, FC-SP-2, FC-MJS, FC-SB |
| Ports | 16Gb Fibre Channel x 2 |
| Status Indicators | Link/activity |
| Expansion / Connectivity | |
| Interfaces | 2 x 16Gb Fibre Channel - LC multi-mode - x 2 |
| Software / System Requirements | |
| Software Included | Emulex OneCommand Manager |
| Environmental Parameters | |
| Max Operating Temperature | 55 °C |
| Min Operating Temperature | 0 °C |
| Compatibility Information | |
| Designed For | Fujitsu PRIMERGY CX2550 M2, CX2550 M2 Liquid Cooling, CX2560 M4 air cooling, CX2560 M4 liquid cooling, CX2560 M5, CX2570 M2, CX2570 M4 PCI air cooling, CX2570 M4 SXM2 liquid cooling, RX1330 M4, RX2510 M2, RX2520 M4, RX2520 M5, RX2530 M2, RX2530 M4, R |