X

Guides

PC-configurator
Register Login
 EN   DA
  1. Front page
  2. Networking and Surveillance
  3. Routers & Accessories
  4. Tools for networking

NetAlly LinkRunner AT 2000 Network Connectivity Tester Netværksforbindelsestester Kobber Fiber

NetAlly LinkRunner AT 2000 Network Connectivity Tester - Netværksforbindelsestester med Link-Live Cloud Service
18 109,00DKK14 487,20DKK excl. VAT

  • Product no 996800345

    Model LRAT-2000

    Brand NetAlly

    EAN 0754082091271

    Weight 0.5 kg

  • Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
Produktbeskrivelse NetAlly LinkRunner AT 2000 Network Connectivity Tester - netværksforbindelsestester
Enhedstype Netværksforbindelsestester
Tests, værktøjer og mål PoE, ping, wiremap, netværksforbindelse
Funktioner TruePower PoE, switch og VLAN-detalje, flere testprofiler
Skærm 2.8"
Dimensioner (B x D x H) 8.9 cm x 19.8 cm x 4.8 cm
Vægt 500 g
Producentgaranti 1 år
Inkluderet service Link-Live Cloud Service
General
Cables Included 1 x USB cable | 1 x RJ-45 coupler
Connectors RJ-45, SFP
Device Type Network connectivity tester
Features TruePower PoE, switch and VLAN detail, multiple test profiles
Included Accessories Wireview cable ID #1
Included Service Link-Live Cloud Service
Media Copper, fiber
Software LinkRunner Manager
Tests, Tools and Measurements PoE, ping, wiremap, network connectivity
Warranty 1 year
Display
Color Support Color
Diagonal Size 2.8"
Battery
Run Time (Up To) 6 hours
Technology Lithium ion
Dimensions & Weight
Depth 19.8 cm
Height 4.8 cm
Weight 500 g
Width 8.9 cm
Environmental Parameters
Max Operating Temperature 45 °C
Max Storage Temperature 60 °C
Min Operating Temperature 0 °C
Min Storage Temperature -20 °C

LinkRunner AT Network Auto-Tester

The LinkRunner AT offers user-configured auto-tests for a wide range of important tasks. This network tester’s quick cable test and switch identification facilitates fast problem isolation.  Test results can be automatically uploaded to the Link-Live results management cloud service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management. ​
  • Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest
  • Validate up to 30W 802.3af/at PSE with TruePower™ loaded Power-over-Ethernet (PoE) test 
  • Verify twisted-pair cable length and wire-map in a snap
  • Automate reporting and enable collaboration with result upload and management via Link-Live Cloud Service B8
    • Use network connectivity test to accurately test and identify network connectivity problems with the 10 second AutoTest
  • Select the right LinkRunner AT Network Auto-Tester for the job: LinkRunner AT Network Auto-Tester-2000 or LinkRunner AT Network Auto-Tester-1000.
LinkRunner AT Network Auto-Tester
Overview

Overview

Discover Nearest Switch 
 • Uses LLDP, CDP, and EDP 
 • Displays nearest switch info: 
– Switch name and model 
– Switch chassis, slot and port# 
– Switch IP Address
– VLANs supported 
– Duplex and speed 
– Signal Strength 
– Connection (MDI or MDI/X) 
– PoE voltage and power 
– Graphical representation of power on pairs 

Model 2000 vs 1000 
• Both models support AutoTest, switch test, and cable test. 
• Exclusive features on LinkRunner AT-2000: 
– Fiber (SFP) support 
– TruePower™ PoE power test up to 30W 
– IPv6 support 
– Reflector support 
– 50 reports 
– Li-ION rechargeable battery 

Cable Test 
• Locate cable runs with: 
– Analog and IntelliToneTM toning 
– Switch port advertisement 
– Switch port link light blinking 
– Remote cable identifiers 
• Check patch cables using built-in wiremap port 
• Easily find opens, shorts, miswires, and split pairs: 
– On non-terminated cable 
– With WireView cable identifier 
– With built-in wiremap port
 
Reflector & Tools 
• End-to-end network path performance tests against the EtherScope nXG to validate LAN and WAN throughput. 
• Can swap MAC and/or IP addresses
 
Link-Live 
• AutoTest results uploaded via Link-Live Cloud Service 
• Provide proof of performance 
• Better manage jobs and staff efficiency
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester1:29
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester3:00
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester1:46
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester
slide {0} of {1}, zoom in, LinkRunner AT Network Auto-Tester
LinkRunner AT Key Features
Two Models: LRAT-2000 and LRAT-1000

Two Models: LRAT-2000 and LRAT-1000

LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features: 

  • Fiber support* 
  • TruePower™ PoE Power Test upto 30W* 
  • IPv6 support*- Reflector support* 
  • More reports: 50 instead of 10* 
  • Uses Li-ION rechargeable battery instead of AA battery pack 

*These exclusive features cannot be added to the LinkRunner AT 1000.

Cable length, Wiremap, and Location

Cable Location 
Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes. 

Cable Wiremap and Length 
Check patch cables using the built-in wiremap port, including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. 

Easily find opens, shorts, miswires, and split pairs three different ways: 
  • On non-terminated cable 
  • With a WireView Cable Identifier 
  • With the built-in wiremap port on the side of the LinkRunner AT
Good Cable including Length
A mis-wired cable with pairs 1,2 and 7,8 swapped using cable identifier #4

Good Cable including Length

A mis-wired cable with pairs 1,2 and 7,8 swapped using cable identifier #4

Discover Nearest Switch and VLAN

Discover Nearest Switch and VLAN

The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.

The LinkRunner AT displays critical nearest switch information including:
  • Switch name and model
  • IP address
  • Chassis, slot and port
  • VLAN IDs
  • Duplex and speed (actual and advertised)
  • Signal Strength
  • Connection (MDI or MDI/X)
  • PoE voltage and power (actual and test limit)
  • Graphical representation of power on pairs
  • 1 Gig link on copper with PoE on port 30
  • 1 Gig link on fiber on port 6
Packet Reflector

Packet Reflector

The LinkRunner AT packet reflector mode allows it to be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1 Gbps. The reflector mode can be configured to swap MAC and/or IP addresses.

LinkRunner AT 2000 supports packet reflection for:
  • LinkRunner® 10G Advanced Ethernet Tester
  • EtherScope™ nXG Portable Network Expert
  • MetroScope™ Service Provider Assistant
  • Any device generating 802.3 frame or IP packet streams
View and Manage Test Results

View and Manage Test Results

Link-Live Reporting Mode
AutoTest results can be automatically uploaded to the Link-Live Cloud Service. Link-Live provides important test results management and reporting capabilities, at no additional charge to the LinkRunner AT.  Test results are automatically sent to your secure Link-Live cloud account, and can even add comments to the result via email.  This provides organizations with a newfound ability to quickly and easily document their network, provide proof of performance and better manage jobs and staff efficiency.

Local Reporting Mode
Alternatively, you can enable the Local Reporting Mode to facilitate saving of AutoTest results on the tester. For AutoTest results saved locally on the tester, the included MS windows-based LinkRunner AT Manager Software facilitates management and analysis of test results, test reports and testers. 

Datasheet LinkRunner ATDatasheet LinkRunner AT
Flyer - LinkRunner ATFlyer - LinkRunner AT
LinkRunner AT User ManualLinkRunner AT User Manual
LinkRunner AT Quick Start GuideLinkRunner AT Quick Start Guide
AllyCare Support FlyerAllyCare Support Flyer
LRAT-1000
LRAT-2000
LRAT-2000-KIT

LRAT-1000

LRAT-2000

LRAT-2000-KIT

Multiple Language Support

The LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese, and Simplified Chinese. Multi-language support includes the LinkRunner AT user-interface, getting started guide, user manual and supporting LinkRunner AT Manager software, as well as help files and user reports.