EN   DA

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R) Styreenhed til lagring (RAID)

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R) - Styreenhed til lagring (RAID) - M.2 - M.2 Card - RAID RAID 0, 1, JBOD, BIG - SATA 6Gb/s - rød
489,00DKK391,20DKK excl. VAT
  • Product no 992947700

    Model S322M225R

    Brand StarTech.com

    EAN 0065030875141

    Weight 0.11 kg

  • Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
Produktbeskrivelse StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R) - styreenhed til lagring (RAID) - M.2 Card - SATA 6Gb/s
Enhedstype Styreenhed til lagring (RAID) - intern
Bustype SATA 6Gb/s
Farve Rød
Kompatibel bås 1 2.5"
Harddiskens formfaktorkompatibilitet M.2
Interface M.2 Card
Dataoverførselshastighed 6 GBps
Understøttede enheder Diskarray (RAID), solid state drev
Maks. antal lagerenheder 2
RAID-niveau RAID 0, RAID 1, JBOD, BIG
Dimensioner (B x D x H) 7 cm x 10 cm x 0.7 cm
Vægt 41 g
Producentgaranti 2 års garanti
General
Color Red
Device Type Storage controller (RAID) - internal
Hard Drive Form Factor Compatibility M.2
Host Bus SATA 6Gb/s
Storage Controller
Data Transfer Rate 6 GBps
Interface M.2 Card
Max Storage Devices Qty 2
Processor ASMedia ASM1092R
RAID Level RAID 0, RAID 1, JBOD, BIG
Supported Devices Disk array (RAID), solid state drive
Expansion / Connectivity
Compatible Bay 1 x internal 2.5"
Connections 1 x SATA 6Gb/s - 22 pin Serial ATA
Interfaces 2 x M.2 Card - M.2 Card
Miscellaneous
Compliant Standards FCC, RoHS, WEEE
Features S.M.A.R.T. support, TRIM support
Included Accessories 4 x screws, 2 sets of drive-mounting hardware
Manufacturer Warranty
Service & Support Limited warranty - 2 years
Dimensions & Weight
Depth 10 cm
Height 0.7 cm
Weight 41 g
Width 7 cm
Environmental Parameters
Humidity Range Operating 15 - 90%
Max Operating Temperature 50 °C
Min Operating Temperature 5 °C

Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface

  • Install two M.2 SSD drives into a single 2.5” drive bay
  • Multiple RAID modes supported: RAID 0, 1, spanning, or JBOD
  • Open-frame steel mounting bracket with 2.5” SATA form factor housing
  • Supports 7 mm or larger 2.5" SATA bays
  • Supports B key M.2 SATA SSDs - full-length M.2 drives (2230, 2242, 2260, 2280)
  • Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
  • Supports SATA I, II and III (up to 6Gbps)
  • TRIM support to enhance the stability and performance of your M.2 NGFF SSDs
  • SMART support
  • Easy to install with all necessary hardware included
Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface
slide {0} of {1}, zoom in, Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface
slide {0} of {1}, zoom in, Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface
slide {0} of {1}, zoom in, Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface
Build a RAID array to enhance system performance

Build a RAID array to enhance system performance

The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independently of one another.
Maximize file transfer speeds

Maximize file transfer speeds

The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of up to 6Gbps.

The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.
Easy installation

Easy installation

This open-frame adapter is easy to install as it comes with all the necessary installation hardware and doesn’t require any extra software or drivers, to get you up and running quickly.

The S322M225R is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

  • Take advantage of the speed of M.2 drives in any 2.5” SATA application
  • Add data redundancy to your system or increase the storage capacity of your system through RAID
  • Retrieve or back up data from M.2 (NGFF) drives using a standard SATA interface
  • Access M.2 (NGFF) drives from an external source, such as a SATA drive enclosure or docking station
.
Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface